R&M LOADMATE LM16 Installation And Maintenance Manual page 24

LM16-20-25 I&M MANUAL/EN/11.30.2010
Hoist Motor Brake
The hoist motor brake is a D.C. electromagnetic disc brake and does not require adjustment. The brake
brings the load to a smooth and quick stop and holds the load when the hoist motor is not energized. An
energized coil releases the hoist motor brake and permits the raising and lowering of the load.
Figure 10. Hoist Motor Brake
8
7
1. Brake Spring
2. Brake Armature Plate
3. Friction Rotor
4. Brake Hub
5. Brake Adjusting Rod
6. Brake Mounting Screw
7. Screw
8. Wear Plate
R&M Materials Handling, Inc. | 4501 Gateway Boulevard, Springfield, Ohio 45502 | PH: 1-937-525-5100 | FAX: 1-937-325-5319
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
AIR GAP
24/73