Procedure To Adjust Swivel Trolley Guide Rollers - R&M LOADMATE LM16 Installation And Maintenance Manual

Hide thumbs Also See for LOADMATE LM16:

Installation & maintenance instructions manual (58 pages)

Installation and maintenance manual (89 pages)

Operator's manual (42 pages)

Table Of Contents

Table of Contents

LM16-20-25 I&M MANUAL/EN/11.30.2010

5.3.3 Procedure to adjust swivel trolley guide rollers

1. Loosen nut "A" (8 plcs).

2. Adjust guide rollers the maximum distance away from beam.

3. Place swivel trolley on beam.

4. Move trolley to curve section of beam.

5. Adjust guide rollers allowing approximately 3/16" (4-5 mm) clearance per side using screw "B."

6. Tighten nut "A" (8 plcs).

Figure 7. Swivel trolley guide rollers

NOTE: Adjustments should be made with swivel trolley in radius of monorail.

R&M Materials Handling, Inc. | 4501 Gateway Boulevard, Springfield, Ohio 45502 | PH: 1-937-525-5100 | FAX: 1-937-325-5319

20/73

This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that

may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.

Table of Contents