Replacement Criteria For Motor Brakes - R&M LM Installation And Maintenance Manual

LM10 I&M MANUAL/EN/11.30.2010

7.4.3 Replacement Criteria for Motor Brakes

Table 2. Replacement criteria for motor brakes
THICKNESS AS NEW
LM 01 0.260 inches (6.6 mm)
LM 05 0.370 inches (9.4 mm)
LM 10 0.055 inches (1.4 mm)
LM 16 0.406 inches (10.3 mm)
LM 20 0.406 inches (10.3 mm)
LM 25 0.406 inches (10.3 mm)
Figure 12. Replacement criteria for motor brakes
LM 01 / 05 / 10 MODELS
R&M Materials Handling, Inc. | 4501 Gateway Boulevard, Springfield, Ohio 45502 | PH: 1-937-525-5100 | FAX: 1-937-325-5319
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret
that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
REPLACE WHEN
0.220 inches (5.6 mm)
0.330 inches (8.4 mm)
0.016 inches (0.4 mm)
0.366 inches (9.3 mm)
0.366 inches (9.3 mm)
0.366 inches (9.3 mm)
LM 16 / 20 / 25 MODELS
27/85