Installation; General; Chain Container Installation; Lubrication - R&M LOADMATE LM16 Installation And Maintenance Manual

LM16-20-25 I&M MANUAL/EN/11.30.2010
2

INSTALLATION

m
DANGER: Before installing, removing, inspection, or performing any maintenance on a
hoist, the main switch shall be de-energized. Lock and tag the main switch in the de-
energized position in accordance with ANSI Z244.1. Follow other maintenance procedures
outlined in this manual and ASME B30.16.
2.1

General

Prior to installation, the unit shall be checked thoroughly for damage during shipment or handling at the job
site.
Each complete electric chain hoist is load tested at the factory at 125% of the nameplate-rated capacity.
All hoists are designed for the type of mounting specified by the purchaser. The adequacy of the supporting
members (monorail beams, cranes, hangers, supports, framing, etc.) is the responsibility of user / owner and
shall be determined or verified by qualified personnel.
Read the instructions contained in this manual and the
Manual as well as any other related manuals. Observe the warning tags attached to the unit before the
installation is started.
2.2

Chain Container Installation

m
CAUTION: REMOVE SMALL CHAIN CONNECTING CHAIN CONTAINER TO HOIST BODY. THIS
CHAIN IS TO BE USED ONLY DURING INSTALLATION AND THEN MUST BE REMOVED.
Due to the weight of the chain and chain container on all Models
attached to hoist body with a LIGHT DUTY chain to facilitate removing hoist and chain container from
packing container for assembly of chain container to hoist body.
2.3

Lubrication

The hoist gear case comes completely pre-lubricated with grease.
Note: Open trolley wheel gearing has not been greased at the factory. See the trolley manual
for proper gear lubricant to use before installing hoist.
The load chain requires lubrication prior to first use. Chain lubricant is included with shipment of each new
chain hoist.
R&M Materials Handling, Inc. | 4501 Gateway Boulevard, Springfield, Ohio 45502 | PH: 1-937-525-5100 | FAX: 1-937-325-5319
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
LoadMate® Electric Chain Hoist Operator's
LM 16 / 20 / 25, the chain container is
9/73