Lubrication - R&M LOADMATE LM16 Installation And Maintenance Manual

LM16-20-25 I&M MANUAL/EN/11.30.2010
7.2

Lubrication

Table 8. Lubrication Specifications
LUBRICATION
POINT
Chain
Oil or Liquid grease
Idler sprocket
Grease (without MoS2)
Slide bearing + KP 2 (DIN 51 502)
bearing
Soap-based lithium
Approx. drip point
Worked penetration
Operating temperature - 4°F - +266° F
Gears Oil EP220
Open Wheel Gearing: EP1 Mobilux or equivalent.
R&M Materials Handling, Inc. | 4501 Gateway Boulevard, Springfield, Ohio 45502 | PH: 1-937-525-5100 | FAX: 1-937-325-5319
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
SPECIFICATIONS
+ 500° F
509-563° F
ACCEPTABLE LUBRICANTS
Chain lubricating fluid (Ceplattyn
or similar) EP-90
BP: BP Energrease LS - EP 2
Esso: Unirex N2
Mobil: Mobilgrease HP
Shell: Shell Alvanio EP Grease 2
Mobil: L-CKC220
BP: Energol XP220
Shell: Omala 150/220
QUANTITY
As required
As required
1.6 liters
1 ¾ qts
51/73