Hook Inspection - R&M LOADMATE LM16 Installation And Maintenance Manual

LM16-20-25 I&M MANUAL/EN/11.30.2010

6.14 Hook Inspection

The wear on the top hook and the load hook shall be checked routinely. Measure the throat opening
(dimension a 2). If the throat opening exceeds the maximum opening allowed (1.15 x a2), replace the hook.
Damaged safety latches shall be replaced immediately.
Maximum throat opening allowed:
Hook class:
Maximum allowed
opening:
R&M Materials Handling, Inc. | 4501 Gateway Boulevard, Springfield, Ohio 45502 | PH: 1-937-525-5100 | FAX: 1-937-325-5319
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
05T 08T
1.54" 1.69"
[39mm] [43mm]
1T 16T
1.81" 2.01"
[46mm] [51mm]
Top Hook
2.13"
[54mm]
38/73