Safety Device For Transport; Storage; Description; Areas Of Application - HADEF 11/09 Installation, Operating And Maintenance Instructions

Aluminium spur gear chain hoist
Table of Contents

Advertisement

3.2

Safety device for transport

NOTICE!
Should a safety device for transport exist, please remove it before commissioning.
3.3

Storage

Store the equipment at a clean and dry place.
Protect the equipment against dirt, humidity and damage by an appropriate cover.
Protect hooks, wire ropes, chains and brakes against corrosion.
4

Description

4.1

Areas of application

The devices must be as far as possible installed in a covered room.
If they are used in the open, protect the units against the effects of weather such as rain, hail, snow, direct
sunshine, dust, etc. - we recommend to use a cover in parking position. If the device is set up in a
continuously humid environment with strong temperature fluctuations, the correct functionings are
endangered by the forming of condensation.
Ambient temperature -20°C up to +50°C. Power-operated units -20 up to +40°C. Humidity 100 % or less but
not under water
DANGER!
It is not permitted to use the unit in an area at risk from explosion!
4.2

Design

Ratchet lever hoists are manual hoists with
suspension hook for stationary use.
They can also be combined with monorail trolleys.
Operation by hand through hand chain.
4.3

Functions

The load is lifted or lowered by pulling one of the chain falls of the endless hand chain of the hoist. A load
pressure brake prevents automatic lowering of the load after releasing the hand chain.
In combination with hand geared trolleys, the trolley is moved to the left or to the right side by pulling the
hand chain.
In combination with push travel trolleys the trolley is moved by pushing or pulling the load or, without load, by
pulling the load chain.
NOTICE!
The best protection against functional failures in case of extreme environmental impact is the regular use of
the equipment.
4.4

Important components

Gear
Gear components are made of high-quality material.
Load pressure brake
Holds the load in any position. Hardened safety pawls.
Housing
Depending on the model made from steel plate or aluminium die-casting (Not for explosion proof equipment).
5.52.189.00.01.05
Illustration 2
7

Advertisement

Table of Contents
loading

Table of Contents