Setting The Water Hardness Level - Hanseatic HG6085D137609HW User Manual

Page EN-16 Dishwasher detergents, rinse aids and dishwasher salts
Setting the water hardness
level
Hard water leads to calcification of the dish-
washer, to extra consumption of dishwasher
detergent, and to unattractive limescale
marks on the cookware. The purpose of the
dishwasher salt is to prevent this. You need
to set the water hardness level to determine
the correct dosage of dishwasher salt. Do this
preferably before using the appliance for the
first time.
Setting the hardness level
In order to determine the water hardness in
your place of residence, you can
– look on the website of your water provider.
– telephone your water supplier.
– purchase suitable test strips at the
pharmacy.
Setting the hardness level
1. Close the dishwasher door.
2. Switch the device on with the On/Off
button (2) and start setting the hardness
level within one minute of switching on.
3. Hold the program button (4) in until the
displays (9) and
quence.
4. Press the program button (4) as many
times as necessary to display the re-
quired hardness level.
The relevant "hardness level" is displayed via
the programme displays (3):
Water
hard- °dH programme display
ness
soft up to 8.4
"90 min." and "Rapid"
medium 8.5 to 14
"Glass" and "Rapid"
more
hard
than 14
"Glass" and "90 min."
5. Around 5 seconds after you push it for the
last time, the dishwasher will automatically
revert to the normal display.
The hardness level setting is saved.
(10) blink in se-
illuminated
readings (3)
"Rapid"
"90 min."
"Glass"