Adding Dishes; Changing The Dishwashing Programme - Hanseatic HG6085D137609HW User Manual

Adding dishes

CAUTION!
Risk of scalding!
If you open the dishwasher door,
hot steam will come out.
Maintain a suffi cient distance from
■
the door and do not hold your head
or upper body directly above the
open door.
Keep children and pets away from the
■
appliance when opening the door.
Make sure that children do not open
■
the door during operation.
You can add more dishes even if the dish-
washing programme is already running.
In this case, the current dishwashing pro-
gramme should only have been running for
a short time, as only then can the additional
dishes be cleaned.
1. To interrupt the wash programme, press
the Start/Pause button (12)
The programme display (3) now lights up
constantly.
2. Open the dishwasher door slightly and
wait until the spraying arm has come to a
standstill and the steam has dispersed.
3. Slowly open the door completely and add
the dishes.
4. Close the door.
5. Press the Start/Pause button again (12)
The dishwasher programme will continue
within 10 seconds. The programme display
(3) flashes.
An acoustic signal sounds every minute
during the interruption of the wash pro-
gramme.
Changing the dishwashing
programme
CAUTION!
Risk of scalding!
If you open the dishwasher door,
hot steam will come out.
Maintain a suffi cient distance from
■
the door and do not hold your head
or upper body directly above the
open door.
Keep children and pets away from the
■
appliance when opening the door.
Make sure that children do not open
■
the door during operation.
You can interrupt an active dishwashing pro-
gramme at any point and start a new one.
It is important to find out how long the current
wash programme has been running. If the
wash programme has been running for a long
time, check the dishwasher detergent/multi-
. tabs dispenser (20) and top up if necessary.
1. Interrupt the wash programme by press-
ing the Start/Pause button (12)
The programme display (3) lights up con-
tinuously.
2. Press and hold the programme selection
button (4) for 3 seconds. The programme
displays (3) light up in sequence.
You can now make a programme selection.
.
3. Press the programme selection button (4)
as often as required until the wash pro-
gramme you want lights up.
You can find an overview of the wash
programme in the "Programme table"
page EN-22.
4. Press the Start/Pause button (12)
The newly selected dishwashing pro-
gramme will start.
Page EN-25
Programme table
.
.