Mounting The Front Panel; Water Hardness - Hanseatic HGVI6082A147913DS User Manual

Mounting the front panel

You can mount a stainless steel front panel
on the appliance door, or another front panel
design which matches your kitchen. The front
panel must not exceed 5-9 kg.
1. Lay the supplied drilling template on the
reverse side of the front panel in such a
way that the drilling template and the front
panel are flush at the top.
2. Transfer the drill holes from the drilling
template to the front panel.
3. Drill the drill holes in the indicated posi-
tions using a (Ø 2 mm) drill bit.
(38) (37) (42)
4. Affix both installation hooks (38) with four
countersunk head screws (42) each onto
the front panel.
5. Affix both mounting pegs (37) using the
countersunk head screws (41) onto the
front panel.
Set-up, connection and initial start-up
6. Hang the furniture front panel on the ap-
(41)
7. Remove the 4 screws from the inside of
(37)
The front panel has been successfully
(38)
mounted.

Water hardness

Determine water hardness
In order to determine the water hardness in
your place of residence, you can
– look on the website of your water provider.
– telephone your water supplier.
– purchase suitable test strips at the phar-
pliance door, hold it firmly and carefully
open the appliance door.
(39)
the appliance door. Screw the front pan-
el in place at these positions using the 4
enclosed countersunk head screws (39)
macy.
Page EN-15