Error Indicators - Hanseatic HG6085D137609HW User Manual

Page EN-36 Troubleshooting table
Problem Possible cause
The dishes are There are food scraps which
not completely are encrusted onto the dishes.
clean.
The dishes have not been
stacked optimally.
You have selected the
incorrect dishwashing
programme.
The dishwasher detergent is
incorrectly dosed.
The water pressure is too low. Turn the water tap on completely.
The spraying arm can not
rotate unhindered.
The nozzles on the spraying
arm are blocked/calcified.

Error indicators

Code Cause
Insufficient water
Rapid
inflow.
Programme display
"Short" flashes very
fast.
Glass Water overflow
Programme display
"Glass" flashes
very fast.
90 min. Required temperature
not reached.
Rapid
Programme
displays "90 min."
and "Rapid" flashes
very fast.
Solution
Soak dirty dishes prior to washing the
dishes.
Stack the dishes in such a way that all
parts can be reached by the water jets
(see "Loading the dishwasher" on
page EN-18).
Select the correct dishwashing pro-
gramme (see "Programme table" on
page EN-22).
Use the correct dosage of dishwasher
detergent (see "Programme table" on
page EN-22).
Ensure that no dishes are impeding the
motion of the spraying arm.
Clean the nozzles (see "Checking
and cleaning the spraying arms" on
page EN-28).
Solution
Turn the water tap on completely.
Arrange the inlet hose properly so that it is
not kinked (see "Connect the inlet hose" on
page EN-32).
Ensure that the water pressure is correct.
See "Technical specifications" on page EN-39.
Switch off the tap. Find the gap in the seal
(or have someone find it) and repair the leak
(or have it repaired).
Have the appliance examined and repaired.