Datcon DT9002 Operating Instructions Manual page 42

Sequence of operations 6. Pressing the ► button you can select the next digit.
Exit from the menu item 1. After finishing the setting, press the MENU button, to exit
Exit from the menu
42
7. Pressing the ▲ button you can increase the value of the
blinking digit:
    
, , , ,
8. When the last digit (right-side) is being selected, and you
press the ► button, a blinking colon appears on the left

side: . The colon indicates that the plus/minus
sign is being selected, and it can be modified by pressing
the ▲ button.
9. Pressing the ▲ button you can switch the minus sign on
or off.

•
= 3.456

•
= -3.456
from the menu item, and you see this:
(2. If you want to change the setting you have done just
now, or if you just want to check what you have typed in, go
on with the operation from point 3 of the Sequence of
operations.)
(3. If you don't want to exit the menu, as you want to do
further settings, then you may select the desired menu
items by pressing the ▲ button.)
1. Press the MENU button. First the mnemonic
(Save), then the mnemonic
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.
    
, , , , ,

, etc.

.

(Exit) are shown on the
20180621-V1
DT9002