Table of Contents
Advertisement
DT9002
Displaying the limit
values
20180621-V1
•
: It switches ON, when (measured value < low
limit) OR (measured value > high limit)
The output switches ON, when the displayed value is lower
than the numerical value defined as the
OR higher than numerical value defined as the
Example for the application:
It indicates that the measured value out of the desired
limits.
(Switching the displaying on: from the 04.LD menu item.)
•
Both outputs are OFF:
•
Output 1 is ON, output 2 is OFF:
•
Output 1 is OFF, output 2 is ON:
•
Both outputs are ON:
If the Alarm Mode is ON, and the given output is in alarm
status, the above displays appear blinking. The blinking
stops only when the acknowledgement is done manually
(Upon pressing the ENTER button.)
parameter
.
79
Advertisement
Table of Contents
