Table of Contents
Advertisement
Setting the physical
value assigned to 20 mA
Disabling the leader
zeros
Exit the menu
70
1. Pressing the ▲ button keep stepping as long as you see
this menu item:
2. Enter the menu item by pressing the ENTER button.
3. Pressing the ▲ button you can increase the value of the
blinking number:
4. Pressing the ► button you can select the next digit.
5. Set the value
6. Press the MENU button, to exit from the menu item, and
you see this:
1. Pressing ▲ button keep stepping as long as you see this
menu item:
2. Enter the menu item by pressing the ENTER button.
3. You see this
blinking.
4. Pressing the ▲ button switch to the
5. Press the MENU button, to exit from the menu item, and
you see this:
1. Press the MENU button. First the mnemonic
(Exit), then the mnemonic
this the storing of the settings is completed. The instrument
has exited the menu and goes on with the measurement.
.
.
.
.
on the display. The mnemonic is
.
(Save) is displayed. With
DT9002
mnemonic.
20180621-V1
Advertisement
Table of Contents
