Advertisement
SERVICE MANUAL
ANGLE ADJUSTMENT
Loosen the bolt A.
Turn the plate clock or anti clock wise.
Once you find the correct inclination, tighten the bolt.
If necessary, you can adjust the inclination of the two independent footplates differently.
POSITIONING
2 positions: 2/3 internal or 2/3 external.
To reverse the position, remove the footplates complete with tubes and assemble right side to left and the other way round—see also chap-
ter "height adjustment". It may be necessary to adjust the angle.
FRICTIONING THE ROTATION
To adjust the friction of the footplate rotation movement, tighten or
loosen the bolt B (the corresponding nut is held within it housing).
Usually, when the footplate is lifted up the adjustment holds it in
place.
REHATEAM s.r.l.—vicolo Negrelli 5—31038 Castagnole di Paese TV - www.rehateamprogeo.com
DOUBLE FOOTPLATE
A
2/3 internal
B
2/3 external
Particularity
Should you need a plate positioned 2/3 internal and the other 2/3
external, it is necessary to have two adjustment supports of the
same side (two right or two left).
Note: for right hand side we intend right facing back, thus, if as-
sembled
on the left, it will be left facing front;
for left hand side we intend left facing back, thus, if assembled on
the right, it will be right facing front;
two LH supports
two RH supports
Service Manual VARIO CARBON 21
Advertisement
