Advertisement
BRAKE WITH CLAMP
SERVICE MANUAL
YOU HAVE TO ADJUST THE BRAKE WHEN THE WHEELS ARE PROPERLY INFLATED (except solid tyre)
C
D
Loosen the bolt A of the clamp B.
If the bolt A is too hard to unscrew, it is advisable to spread some
lubricant oil on it.
Now you can slide the brake frontward/backward through the clamp
and/or the clamp along the frame. At the same time, you can turn the
clamp on the frame and the brake on the clamp.
Position the brake-knurled rod C at a distance D of a few millimetres
and parallel to the ground.
Temporarily tighten the bolt A and try the brake out to check if the
adjustment is good.
If necessary, repeat the same operation to reach the good adjust-
ment.
A good adjustment has the brake not too hard to engage but braking,
so you will have to find the suitable compromise.
Once reached the correct position, tighten the bolt A.
Carry out the same operation on the other side.
The adjustment for the sport brake is the same except for the dis-
tance D, in fact, the brake, in its resting position is far away from the
tyre. Just make a few tries.
Service Manual VARIO CARBON 18
REHATEAM s.r.l.—vicolo Negrelli 5—31038 Castagnole di Paese TV - www.rehateamprogeo.com
Advertisement
