Christie CP2309-RGB Installation And Setup Manual page 35

2. Set the projector brightness level to approximately 50% to 60%.
3. Retrieve the 3 mm hex driver located inside the toolbox.
4. Remove the top lid of the projector.
5. Loosen the two integrator set screws.
6. Loosen the lock screw located next to the Focus adjustment slider.
7. Unlock the fold mirror screws to unlock the adjustment knobs.
CP2309-RGB Installation and Setup Guide
020-103078-01 Rev. 1 (06-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Adjusting the image
35