Directed Electronics 554R Owner's Manual page 42

note: Your system stores the last two triggered zones in
memory. If your system has been triggered but the LED
has been reset by turning on the ignition, your dealer can
still recall the last two zones that were triggered. Contact
your dealer for details.
Arming and disarming diagnostics (including Warn Away
responses) are reported by the transceiver on the LCD.
When a Bypass Notification is generated during arming the
transceiver LCD will flash until the alarm is reset by the
ignition.
To review zones that have been bypassed press
seconds after arming the system. The bypassed zones will
flash until the alarm is reset by the ignition.
When a Tamper Alert notification is generated upon
disarming, the triggered zones will flash continuously on the
transceiver LCD until reset by the ignition.
To review the zones that have been triggered press the
button. They flash five times, then turn off.
© 2003 directed electronics, inc.
®
10
39