Valet Take-Over - Directed Electronics 554R Owner's Manual

The hood is opened.
The shutdown toggle switch is put into the OFF position.
The pre-programmed run time (12, 24, or 60 minutes) has
elapsed.
Transceiver buttons
the vehicle.
The transceiver will generate a page notification with a unique
melody (or vibrate) and the remote start icon (19) will turn off
when the remote start shuts down.

valet take-over

®
The Valet Take-Over feature allows the vehicle to remain
running after the key has been removed from the ignition. This
feature is useful for occasions when you wish to exit and lock the
vehicle for short periods of time, but would like to leave the
motor running and the climate controls on.
®
To perform Valet Take-Over:
1. Before turning off the engine, simultaneously press and
release and
notification with a unique melody (or vibration) will be
generated and the LCD will display the remote start icon
(19) as long as the vehicle is running. Then wait three
seconds.
2. Turn the ignition key to the OFF position. (The engine will
stay running.)
© 2003 directed electronics, inc.
and are pressed again to start
on the transceiver. A remote start page
31