Multi-Level Security Arming - Directed Electronics 554R Owner's Manual

Disarming while driving
Press on the transceiver or simply turn off the ignition to
disarm the system. The lights will flash twice, the doors will
unlock, the siren will chirp twice, and the status LED will turn
off. The transceiver will beep twice (or vibrate). The disarm icon
(29) will be displayed on the LCD.
note: If the transceiver received a Warn Away
response page while armed, the first press of the unlock
button will clear the page alert. A second press will turn
the siren off, and a third press will disarm the system.

multi-level security arming

Multi-Level Security Arming allows you to select which of the
system's inputs or sensors will be active and which will be bypassed
when the system is armed. (See Table of Zones section of this
guide.) Pressing
five seconds of arming the system will activate the Multi-Level
Security feature. Each press of
level, and the transceiver will beep or vibrate once and the arm
icon (29) will flash on the LCD. The system will respond as
follows.
Press once: The siren chirps once and the system is
armed.
Press a second time within five seconds: The siren chirps
twice followed by a long chirp. Zone 2 is now bypassed.
Press a third time within five seconds: The siren chirps
three times followed by a long chirp. Zone 4 is now bypassed.
© 2003 directed electronics, inc.
(only in standard configuration) again within
will select a different security
® or triggered
23