Panic Mode - Directed Electronics AM2 Owner's Manual

To enter or exit Valet
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the inte--
grated LED/Valet
within 10 seconds.
The status LED lights continuously if you are entering Valet
Mode and turns off if you are exiting Valet

panic mode

If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transmitter. Just
press for two seconds to enter Panic Mode. In Panic Mode,
the horn will honk and the parking lights will flash for 30
seconds. To stop Panic Mode at any time, press
transmitter again.
note: In order for Panic Mode to be effective, the vehicle's
horn (or optional siren) as well as the vehicle's parking
lights must be connected.
10
® Mode:
® switch
© 2003 directed electronics, inc.
DRW-35
®
® Mode.
on the