Silent Mode; Valet Mode - Directed Electronics AM2 Owner's Manual

To unlock the security system,
turn the ignition to the ON posi-
tion. Press and release the inte-
grated LED/Valet
10 seconds. The status LED will
stop flashing and the vehicle
should start. If the vehicle does
not start, you may have waited
too long; turn the ignition off and
repeat the process.
Location of integrated LED/Valet

silent mode

TM
To temporarily turn off the lock or unlock chirps, (if the horn is
hooked up) use Silent Mode™. Simply press
one second before locking or unlocking, and the confirmation
chirp(s) will be eliminated for that one operation only. If you
want the lock/unlock chirps turned off permanently, your dealer
can do this for you.
valet mode
®
You can prevent your system from automatically activating the
Failsafe ® Starter Kill and locking the doors by using Valet
This is very useful when washing the vehicle or having it
serviced. In Valet
even with the transmitter, but all convenience functions (door
locks, trunk release, etc.) will continue to work normally.
© 2003 directed electronics, inc.
® switch within
® Switch______________________
® Mode, the starter kill cannot be activated,
DRW-35
for less than
® Mode.
9