Transmitter Configurations; Standard Configuration; Single Button Arm/Disarm Configuration - Directed Electronics Auto mate 552 Installation Manual

Table of Contents

transmitter configurations

The transmitters can be programmed with the standard or single button arm/disarm configurations by using the

Auto-learn functions in the Transmitter/Receiver Learn Routine.

A remote that uses the standard configuration operates similarly to many factory keyless entry remotes. A stan-

dard configuration transmitter allows arming, disarming, and Panic Mode activation with separate buttons. When

programmed for standard configuration using the Channel 8 Auto-learn configuration, the transmitter buttons

are assigned to the following functions:

.....................................operates ...........................Arm only

...................................operates ...........................Disarm only

..................................operates ...........................Channel 2

...................................operates ...........................Panic only

and

When programmed for single button arm/disarm configuration using the Channel 7 Auto-learn configuration, the

transmitter buttons are assigned to the following functions:

.....................................operates ...........................Arm/Disarm/Panic

....................................operates ...........................Channel 2

..................................operates ...........................Remote Start

...................................operates ...........................Channel 3

......................operate............................Remote Start

Table of Contents