Maintenance - Infinity 620 HD Instruction For User, Installation & Servicing

620 HD UBL MAINTENANCE INSTRUCTIONS

Maintenance

To Remove the Burner Carrier Assembly
Remove the glass panel as described on page 9 of the users instruction section.
Remove the Loose shapes.
Remove the four screws retaining the gas inlet plate and the ECU cover.
Shut off the restrictor elbow and disconnect the 8mm inlet nut.
Switch off the mains supply from the main supply plug socket.
Undo the M3 nut retaining the ECU unit and remove the connection bracket plus disconnect the
mains supply cable connection.
Take out the four screw retaining the burner tray assembly and lift out of the fire box shelf taking
care not to damage the panels.
LT 8125 Issue No 1
P a g e | 39