Pro-Cut X9 Technical Manual page 9

YOUR LATHE PACKAGE
Every Pro-Cut PFM X9 Lathe Package comes complete, ready to assemble and use. Setup and on-site training is
included by a local, certified Pro-Cut Rep. Please contact Pro-Cut at 800-543-6618 immediately if you have not
already made arrangements for on-site training. In order for your shop to appreciate the benefits of this machine
as soon as possible after the lathe is installed, it is CRITICAL that technicians take the on-line training PRIOR to
the Pro-Cut Rep arriving to set up the lathe.
TrainSMART is Pro-Cut's nationwide training and certification program in rotor matching. The two-part program
begins with an online class where the basics of rotor matching and lathe use are covered, and is a prerequisite
Level 2. Techs will take an online quiz and print a certificate to be signed later by the trainer after part 2 is com-
pleted successfully. The second part of the program is a hands-on training class offered by an expert Pro-Cut
representative or college instructor.
WWW.PROCUTUSA.COM PG / 9