Pro-Cut X9 Technical Manual page 63

Once the first side is complete, move to the other side and complete the second rotor on that axle. You will
19.
need to rotate the lathe 180 degrees as per the instructions in the lathe owner's manual.
20. Follow the same process for the second rotor, scratching the rotor, marking the beginning thickness, cutting
to the appropriate depth, and saving the results.
21. You may now print the results by touching the "Print" button in the lower left hand corner of the screen. The
printed results can now be shared with the customer or can be used for warranty documentation.
OTHER VEHICLE MANUAL ENTRY OF A VEHICLE
If the vehicle does not have a bar code, or you are unable to successfully read the VIN with the scanner, then
you can manually enter the vehicle information by selecting year, make, and model from the drop down menus.
The GYR application not only includes the LRO and thickness specifications, but also includes other needed
around the wheel information such as: Tire size, tire pressure, wheel nut torque, brake caliper bolt torque, etc...
WWW.PROCUTUSA.COM PG / 63