Pro-Cut X9 Technical Manual page 35

DRO EFFICIENCY TRACKING
The remaining screens are accessed through the START button and are scrolled through by continued pressing of the
START button. The machine first must be in the Ready mode and the motor must be off. Press and hold the START
button until all of the lights come on, then release and the Hour screen will be displayed . Then, press the START
button again and the number of hours that the motor has run will be displayed in hours and tenths of an hour.
| The first diagnostic screen This value represents hours and tenths of an hour
that the motor has run.
WWW.PROCUTUSA.COM PG / 35