Pro-Cut X9 Technical Manual page 36

DRO EFFICIENCY TRACKING
Press the START button again and the word "Total" will be displayed. Press the START button once more and the
total number of times the machine has compensated will be displayed.
DRO DIAGNOSTICS
Press the START button once more and the "A.Adj." will be displayed. Press the START button once again and the
average adjustment (compensation) time over the course of the total number of compensations the machine has
completed will be displayed in seconds.
PG / 800.543.6618
36
This value represents the total num-
ber of completed compensation cy-
cles. Estimating one cycle per cut,
we can begin to establish ROI.
This value represents the average
compensation time recorded in
seconds over the life of the lathe.