Pro-Cut X9 Technical Manual page 68

GYR TROUBLESHOOTING GUIDE
PC will not print.
ISSUE
TROUBLESHOOT
Thickness value of rotor does not change on screen.
ISSUE
TROUBLESHOOT
PG / 800.543.6618
68
CONTINUED
Check Wi-Fi connectivity. Any network issues should be reported to your internal IT
department.
1. Check wire connections on cutting head sensor.
2. Check 15-pin connector located on lathe computer for poor connection or damage.
3. Unplug lathe for 15 seconds.
4. Plug back in to reset connections.