Pro-Cut X9 Technical Manual page 7

IMPORTANT SAFETY INSTRUCTIONS
The X9 Rotor Matching System is a precision instrument which requires close attention while in operation. It will pro-
vide many years of service if it is operated safely. Basic Safety precautions should always be followed, including the
following:
1. Read all instructions
Care must be taken as burns can occur from touching hot parts.
2.
3. Do not operate equipment with a damaged cord or if the equipment has been dropped or damaged - until it has been
examined by a qualified service person.
4. Do not let a cord hang over the edge of the table, bench, counter or come in contact with hot manifolds or moving fan
blades.
5. If an extension cord is necessary, a cord with a current rating equal to or more than that of the equipment should be
used. Cords rated for less current than the equipment may overheat. Care should be taken to arrange the cord so that
it will not be tripped over or pulled
Always unplug equipment from electrical outlets when not in use. Never use the cord to pull the plug from the outlet.
6.
Grasp the plug and pull to disconnect.
7. Let equipment cool completely before putting away. Loop cord loosely around equipment when storing.
To reduce the risk of fire, do not operate equipment in the vicinity of open containers of flammable liquids (gasoline).
8.
9. Adequate ventilation should be provided when working on operating internal combustion engines.
10. Keep hair, loose clothing, fingers, and all parts of the body away from moving parts.
11. To reduce the risk of electric shock, do not use on wet surfaces or expose to rain.
Use only as described in this manual. Use only manufacturer's recommended attachments.
12.
ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact resistant lenses. THEY ARE NOT SAFETY
13.
GLASSES.
SAVE THESE INSTRUCTIONS
WWW.PROCUTUSA.COM PG / 7