Figure 26: Backup And Recovery; Figure 27: Recovery Dialog - hilscher NIOT-E-TPI51-EN-RE User Manual

Control Panel
Edge Gateway | NIOT-E-TPI51-EN-RE (Connect)
DOC170502UM04EN | Revision 4 | English | 2018-08 | Released | Public
Recovery from internal backup
Choose this option to restore the system using the stored data, if already
an internal backup has been performed within your device.
Take care of the following consequences of system recovery:
· that the former system is fully replaced and overwritten by the system
stored in the backup file.
that the system is stopped.
·
that a new start of the system is initiated.
·
that this process can last for a significant amount of time and cannot be
·
interrupted.
that you must not interrupt power supply of the Edge Gateway in
·
any case.
In order to restore your system from a previous internal backup, proceed as
follows.
Ø Select System>Backup and Restore within the Control Panel..
Ê The following screen appears:
Figure 26: Backup and recovery
Ø Click at Restore from backup.
Ê The following recovery dialog is displayed:
Figure 27: Recovery dialog
44/258
© Hilscher 2017 – 2018