hilscher NIOT-E-TPI51-EN-RE User Manual page 134

Examples for Node-RED
12. Deploy:
Edge Gateway | NIOT-E-TPI51-EN-RE (Connect)
DOC170502UM04EN | Revision 4 | English | 2018-08 | Released | Public
Ø Click Deploy to transmit the nodes, that have so far existed in the editor
only, to the device and activate them.
ð The flow is activated in the Edge Gateway.
The section OPC UA output node [} page 110] describes the parameters of
the OPC UA output node.
Testing the flow
For testing the flow you need a connection to the OPC UA server.
Ø Click the button to the left of Inject node 1.
Ê Value 1 will be written to object DOUT1 in the OPC UA server.
Ø Click the button to the left of Inject node 2.
Ê Value 2 will be written to object DOUT1 in the OPC UA server.
134/258
© Hilscher 2017 – 2018