Backup And Restore; Figure 24: Backup And Recovery - hilscher NIOT-E-TIB100-GB-RE User Manual

Control Panel
8.3.5

Backup and restore

Edge Gateway | NIOT-E-TIB100-GB-RE (Remote)
DOC170501UM04EN | Revision 4 | English | 2018-08 | Released | Public
Open this page by System > Backup and Restore.
You have to login as Administrator to use this function.
This page offers the possibility to store the complete system files of the
Linux operating system of your Edge Gateway onto an external mass
storage device and to restore it from there, if necessary.
Backup
Observe the following information:
The duration of the backup depends on the quantity of data.
·
A running backup cannot be interrupted.
·
The backup can deteriorate the performance of the Edge Gateway.
·
Save the backup on an external data carrier because any existing
·
backup will be overwritten irrevocably without prior notice.
In order to create a backup of your system, proceed as follows:
Ø Select System > Backup and Restore in the control panel.
Ê The following screen is displayed:
Figure 24: Backup and recovery
Ø Click at Create local backup.
47/263
© Hilscher 2017 – 2018