Figure 79: Dialog Box Edit Opc Ua In Node - Tab Mode - Polling; Figure 80: Options Of The Selection List Payload; Figure 81: Opc Ua In - Specific Payload; Table 42: Options Of The Payload List - hilscher NIOT-E-TPI51-EN-RE User Manual

Node-RED - The wiring editor
Edge Gateway | NIOT-E-TPI51-EN-RE (Connect)
DOC170502UM04EN | Revision 4 | English | 2018-08 | Released | Public
Operating mode Polling
Figure 79: Dialog box Edit OPC UA in node – tab Mode - Polling
By means of the selection list Payload you configure the amount of the
payload.
Figure 80: Options of the selection list Payload
Option Description
all All data is transmitted as payload.
value The value is transmitted only. The value is transmitted without time stamp.
specific Only data that you can select by checking one box or several boxes will be
transferred. The time stamp will be transferred, too.
Table 42: Options of the payload list
By selecting the option specific you can select the attributes to be
transmitted in the payload.
Figure 81: OPC UA in - specific payload
107/258
© Hilscher 2017 – 2018