Removing The Wireless Lan Module - Clevo N170RD1 Service Manual

Removing the Wireless LAN Module

1. Turn off the computer, remove the battery
2. The Wireless LAN module will be visible at point
3. Carefully disconnect the cables
4. The Wireless LAN module
5
a.
1
b.
2
4
3
(page 2 - 5), keyboard
on the mainboard
1
& , and then remove the screw
2 3
(Figure 11c) will pop-up, and you can remove it from the computer.
c.
(page 2 - 6) and bottom case (page 2 -
(Figure 11a).
(Figure 11b)
4
5
5
Removing the Wireless LAN Module 2 - 15
Disassembly
Figure 11
Wireless LAN
8).
Module Removal
a. Locate the WLAN.
b. Disconnect the cables
and remove the screw.
c. The WLAN module will
pop up.
Note: Make sure you
reconnect the antenna
cable to the "1 + 2"
socket (Figure 11b).

5.Wireless LAN Module
• 1 Screw