Table of Contents
Advertisement
Disassembly
Removing the Hard Disk Drive
Figure 4
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm
HDD Assembly
or 7mm (h). Follow your operating system's installation instructions, and install all necessary drivers and utilities (as
Removal
outlined in Chapter 4 of the User's Manual) when setting up a new hard disk.
a. Remove the screws and
Hard Disk Disassembly Process
HDD cover.
b. Slide the HDD in the di-
1. Turn off the computer, remove the battery
rection of the arrow.
2. Remove screws
3. Remove screws
a.
1
Screw Size
Note that the size of
screws
1
&
2
is
M2.5 x 5L.
3. HDD Cover
• 4 Screws
2 - 8 Removing the Hard Disk Drive
(page 2 -
-
and HDD cover
(Figure 4a
1
2
3
-
and then slide the hard disk out in the direction of arrow
4
5
2
3
5) and keyboard
(page 2 -
6).
)
.
6
b.
4
5
(Figure 4b
).
6
Hide quick links:
Advertisement
Table of Contents
