Removing The Wireless Lan Module - Clevo W241EUQ Service Manual

Removing the Wireless LAN Module

1. Turn off the computer, remove the battery
2. The Wireless LAN module will be visible at point
3. Carefully disconnect cables
4. Lift the Wireless LAN module
a.
1
b.
4
3
2
(page 2 - 5) and the component bay cover
on the mainboard.
1
- , then remove screw from the module socket
2 3 4
(Figure 9c) up and off the computer.
5
c.
.
(page 2 - 8)
(Figure 9b).
a. Remove the cover.
b. Disconnect the cables
c. Lift the WLAN module
Note: Make sure you
reconnect the antenna
cable
5
''2''socket
9b).
Removing the Wireless LAN Module 2 - 13
Disassembly
Figure 9
Wireless LAN
Module Removal
and remove the screw.
out.
to ''1'' +
(Figure

5. WLAN Module.
• 1 Screw