Table of Contents
Advertisement
Disassembly
Removing the Optical (CD/DVD) Device
Figure 8
Optical Device
1. Turn off the computer, remove the battery
Removal
2. Remove screw
3. Carefully pry the bezel
a. Remove screw and push
4. Separate the bezel
the optical device out off
5. Reverse the process to attach the front bezel
the computer.
6. Insert the new device and carefully slide it into the computer (the device only fits one way. DO NOT FORCE IT; The
b. Pry the bezel off the opti-
cal device.
screw holes should line up). Replace the bottom cover and tighten the screws.
c. Separate the bezel and
7. Restart the computer to allow it to automatically detect the new device.
optical device
d. Install the front bezel.
a.
Screw Size
Note that the size of
screw
1
is M2 x 8L.
b.
1. Optical Device
4. Bezel Cover
2 - 12 Removing the Optical (CD/DVD) Device
and carefully push the optical device
1
off the optical device at point
5
and the optical device as shown
5
1
3
c.
4
(page 2 -
5), and bottom case
(page 2 -
out of the bay at point
2
6
(Figure 8b
)
.
4
(Figure
8c).
with the new optical device at point
5
2
5
8).
(Figure 8a
)
.
3
(Figure
8d).
6
d.
5
6
Hide quick links:
Advertisement
Table of Contents
