Removing The 2Nd Hard Disk From Caddy Bay - Clevo N170RD1 Service Manual

Removing the 2nd Hard Disk from Caddy Bay

1. Turn off the computer, remove the battery
2. Carefully push out the caddy bay
3. Remove screws - (will depends on the HDD type) from the bottom of the caddy bay.
3 4
4. Remove screws - to release the hard disk assembly
5 6
5. Lift the hard disk assembly
6. Separate the hard disk and connector board
9
7. Reverse the process to install a new hard disk.
8. Restart the computer to allow it to automatically detect the new device.
a.
b.
3
4
(page 2 - 5), and bottom case
out in the direction of the arrow
6
1
(Figure 7b
out of the caddy bay (Figure
7 8
(Figure
10
1
2
5
6
(page 2 - 8).
(Figure 7a ) .
2
)
.
7c).
7d).
c.
8
7
d.
9
Removing the 2nd Hard Disk from Caddy Bay 2 - 11
Disassembly
Figure 7
2nd HDD Removal
a. Push the caddy bay out
off the computer.
b. Remove the screws.
c. Lift the hard disk assem-
bly out of the caddy bay
d. Separate the hard disk
and connector.

10 1. Dummy Bay
7. HDD Assembly
9. Hard Disk
10. Connector Board
• 4 Screws