Removing The Wireless Lan Module - Clevo N250WU Sevice Manual

Disassembly

Removing the Wireless LAN Module

Figure 7
WLAN Module
1. Turn off the computer, turn it over to remove the battery
Removal
2. The Wireless LAN module will be visible at point
3. Carefully disconnect the cables
a. Locate the WLAN.
4. The Wireless LAN module
b. Disconnect the cable
and remove the screw.
c. The WLAN module will a.
pop up and lift it out of
the computer.
Note: Make sure you
reconnect the antenna
cable to the "1 + 2"
socket (Figure 7b).
b.

5.Wireless LAN Module
• 1 Screw
2 - 12 Removing the Wireless LAN Module
& , and then remove the screw
2 3
(Figure 7c) will pop-up, and you can remove it from the computer.
5
c.
1
2
4
3
(page 2 - 5) and bottom cover
on the mainboard (Figure 7a).
1
(Figure 7b)
4
5
(page 2 - 6).
5