Removing The Wireless Lan Module - Clevo W241BU Service Manual

Removing the Wireless LAN Module

1. Turn off the computer, remove the battery
2. The Wireless LAN module will be visible at point
3. Carefully disconnect cables
4. Lift the Wireless LAN module
a.
1
b.
4
3
2
(page 2 - 5) and the component bay cover
on the mainboard.
1
- , then remove screw from the module socket.
2
3 4
(Figure 7c) up and off the computer.
5
c.
(page 2 - 9) .
a. Remove the cover.
b. Disconnect the cables
c. Lift the WLAN module
Note: Make sure you
reconnect the antenna
5
cable
''2''socket
b).
Removing the Wireless LAN Module 2 - 11
Disassembly
Figure 7
Wireless LAN
Module Removal
and remove the screw.
out.
to ''1'' +
(Figure

5. WLAN Module.
• 1 Screw