Removing The M.2 Ssd Module - Clevo N170RD1 Service Manual

Disassembly

Removing the M.2 SSD Module

Figure 10
M.2 SSD Module
1. Turn off the computer, remove the battery
Removal
2. The M.2 SSD module will be visible at point
3. Remove the screw
a. Locate the M.2 SSD.
4. The M.2 SSD module
b. Remove the screw.
5. Reverse the process to install a new SSD module (make sure that the thermal pad is in place as shown below).
c. The M.2 SSD module
will pop up.
a.

3.M2 SSD Module
• 1 Screw
2 - 14 Removing the M.2 SSD Module
(Figure 10b)
2
(Figure 10c) will pop-up, and you can remove it from the computer.
3
1
b.
(page 2 - 5), keyboard (page 2 -
on the mainboard (Figure
1
c.
2
6) and bottom case (page 2 - 8).
10a).
3
3