Power Sources; Cooling Solution - Ruijie RG-AP820-L(V2) Series Hardware Installation And Reference Manual

State Frequency
Off N/A
Blinking green 3Hz
Solid green N/A
Blinking red 3Hz
Solid blue N/A
Blinking blue 3Hz
Pressed for less
than 2s
Reset button
Pressed for more
than 3s

1.4 Power Sources

The AP can be powered either with a DC power adapter or through Power over Ethernet (PoE).
The AP requires Ruijie power adapters (If needed, you can buy them from Ruijie).
To use a PoE device, make sure it supports the IEEE 802.3af PoE standard.

1.5 Cooling Solution

The AP adopts fanless design.
Leave sufficient space at the surrounding of the AP when place the AP to permit airflow for proper ventilation.
Meaning
The AP is NOT receiving power. Or the AP is in Do Not Disturb mode, which
can be disabled by software.
uBoot program initialization in progress
Main program initialization in progress
Initialization is complete, but no Ethernet activity.
Normal operation, but no wireless clients are associated with the AP.
Normal operation, at least one wireless client is associated with the AP.
Reboots the device.
Restores default settings.
·