4. LUBRICATION SYSTEM
SERVICE INFORMATION
GENERAL INSTRUCTIONS
The maintenance of lubrication system can be performed with the engine installed on the frame.
Drain the coolant before starting any operations.
Carefully when removing and installing the oil pump not to allow dust and foreign matters to enter
the engine and oil line.
Do not attempt to disassemble the oil pump. The oil pump must be replaced as a set when it
reaches its service limit.
After the oil pump is installed, check each part for oil leaks.
SPECIFICATIONS
ENGINE OIL
Engine Oil Capacity
Recommended Oil
TROUBLESHOOTING
Oil level too low
Natural oil consumption
Oil leaks
Worn piston rings
Worn valve guide
Worn valve guide seal
Oil contamination
Oil not changed often enough
Faulty cylinder head gasket
Loose cylinder head bolts
At disassembly: 1.5 liter
SAE5W50# API: SJ
Poor lubrication pressure
Oil level too low
Clogged oil filter or oil passage
Faulty oil pump
DOWNTOWN 300I ABS
At change: 1.3 liter
4-2