KYMCO Downtown 300i ABS Service Manual page 66

5. ENGINE REMOVAL/INSTALLATION
Remove the engine mount nut and pull it out.
Remove the engine from the frame.
＊
At removing the engine, be careful not
to catch your hand or finger between
the engine hanger and crankcase.
Torque: 6.5 kgf-m (65 N-m)
INSTALLATION
Installation is in the reverse order of removal.
After installation, inspect and adjust the
following:
• Throttle grip free play
• Fill the cooling system with coolant and
start the engine to bleed air from the system.
API/ABV Reset (Refer to chapter14, page 17)
5-5
Downtown 300i ABS
Mount Nut