13. FUEL INJECTION SYSTEM
SELF-DIAGNOSTIC
PROCEDURES WITHOUT
DIAGNOSTIC TOOL
SELF-DIAGNOSTIC PROCEDURES
*
It can be performed without diagnostics
program.
Place the scooter on its main stand.
Put the side stand up and the engine stop
switch is at "RUN".
● Turn key to On position.
● The CELP will be lighting for two seconds
and then off.
● If the engine has problem, the CELP will
blink to show the failure codes.
● There're 11 failure codes for the KEHIN
system.
If the vehicle gets more failure codes, the
CELP will be blinking from a lower number,
then show the higher number after three
seconds. All failure codes would be
appeared repeatedly.
*
No matter when the "CELP" illuminated
while riding condition, should find out
the cause of the problem as soon as
13-7
Downtown 300i ABS
Upward side
stand
Battery warning indicator
Fi indicator
RUN