KYMCO Downtown 300i ABS Service Manual page 238

19. LIGHTS/METERS/SWITCHES
INSPECTION
Connect the fuel unit wire connectors and
turn the ignition switch "ON".
＊
Before performing the following test,
operate the turn signals to determine that
the battery circuit is normal.
Measure the resistance
Red/Black and Green wire of the fuel unit
connector.
Standard (at 20°C/68°F):
Float at full position
Float at empty position About 100 Ω
between the
About 1100 Ω
Downtown 300i ABS
F
E
19-12