KYMCO Downtown 300i ABS Service Manual page 202

15
. REAR WHEEL/REAR BRAKE/
REAR SUSPENSION
Downtown 300i ABS
Compressed Air
Remove the piston from the brake caliper.
If necessary, use compressed air to squeeze
out the piston through the brake fluid inlet
opening and place a towel under the caliper
to avoid contamination caused by the
removed piston.
Check the piston cylinder for scratches or
wear and replace if necessary.
Check the caliper cylinder for scratches or
wear and measure the cylinder bore.
ASSEMBLY
Install the two spring plates onto the groove
of the caliper.
15-4