Lexmark XM9100 Series User Manual page 282

Troubleshooting
Region number
5
9
Notes:
•
The x and y values represent .xy in the code that appears on the printer control panel.
•
The x and y values must match for printing to continue.
Replace jammed originals if restarting job.
Try one or more of the following:
•
Touch Cancel job to clear the message and cancel the scan job.
•
Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan
job.
•
Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
•
Touch Finish job without further scanning to end the last successful scan job.
•
Touch Restart job to restart the scan job with the same settings from the previous scan job.
Replace [x] maintenance kit, 0 estimated pages remain [80.xy]
The printer is scheduled for maintenance. For more information, go to the Lexmark support Web site at
http://support.lexmark.com
Replace missing photoconductor [31.xy]
Install the missing photoconductor unit to clear the message. For more information, see
unit" on page 213.
Replace missing waste toner bottle [82.xy]
Install the missing waste toner bottle to clear the message. For more information, see the instruction sheet that came
with the supply.
Replace missing cartridge [31.xy]
Install the missing cartridge to clear the message. For more information, see
221.
Region
Africa, Middle East, rest of Europe
Invalid
or contact your service representative, and then report the message.
"Replacing a photoconductor
"Replacing the toner cartridge" on page
282