Table of Contents
Advertisement
Clearing jams
Clearing jams
Carefully select paper and specialty media, and then load them properly to avoid most jams. If jams occur, then follow
the steps outlined in this chapter.
Note: Jam Recovery is set to Auto by default. The printer reprints jammed pages unless the memory required to hold
the pages is needed for other printer tasks.
Avoiding jams
Load paper properly
•
Make sure paper lies flat in the tray.
•
Do not remove a tray while the printer is printing.
•
Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it.
•
Do not load too much paper. Make sure the stack height is below the maximum paper fill indicator.
•
Do not slide the paper into the tray. Load paper as shown in the illustration.
•
Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing tightly
against the paper or envelopes.
•
Push the tray firmly into the printer after loading paper.
Use recommended paper
•
Use only recommended paper or specialty media.
•
Do not load wrinkled, creased, damp, bent, or curled paper.
Correct loading of paper
Incorrect loading of paper
242
Advertisement
Table of Contents
